How to Replace Charging Port on LG Stylo 4

How to replace charging port on LG Stylo 4? This is the question that we are going to be answering in the guide from Technology Gadgets Magazine. If this is something that interests you, stay tuned to the end of the article.

The problem of not being able to charge your mobile phone is quite troublesome. One of the main causes of this problem is the failure of the charging port. LG Stylo 4 charging port is an important part of the device. This piece has a delicate structure that is highly sensitive to user wear and tear.

Replace Charging Port on LG Stylo 4

Required tools:

• Heat gun
• Solder wire
• Tin paste
• Toothpick
• Tweezers

Step 1: Take some tin paste with the help of a toothpick. Apply it gently around the soldered areas of the charging port.

Step 2: Heat the soldered areas evenly. In general, the charging port is built on a PCB board, which should be heated to about 280-300 degrees Celsius in the first minute.

Considering that the charging port is built on a flat cable, to protect the delicate flat cable from burns, the temperature should be reduced to 280 degrees Celsius from the beginning to the end of the work.

Step 3: After heating the port, remove the charger port slowly with the help of tweezers.

Step 4: Solder some tin wire around the soldered areas on the plug-in board. Then apply some tin paste in those areas.

Step 5: Gently remove the replacement USB port and place it in the soldering area, placing the charging port in its proper place. While heating it, simultaneously fix it with a pair of tweezers.

Signs You Need to Replace Charging Port on LG Stylo 4

Damage to the charging port can have various signs and symptoms that we will check together below.

Charger port loosening: This problem occurs when the user applies a lot of pressure and tension when pulling or connecting the charger to the socket and causes it to break. The solders connecting the charger port to the secondary board are loose or part of it is damaged, which eventually causes the charging port to loosen.

Indentation of the charging port: one of the reasons for this problem is putting too much pressure on the charger port, which causes it to deviate from its normal position and lean towards the frame of the device and it is difficult to connect the charger to the socket. Usually, more than 40% of users face this problem and it is possible that during the charging process, they may face disconnection and connection of charging.

Disconnecting and connecting: In some cases, the charging port on your LG Stylo 4  may not have any problems in terms of appearance, but when you connect the charger port, you will constantly see the charging disconnection and connection. First, check your charging cable, if there is no problem and it charges other devices, your mobile phone’s charging port is probably damaged.

Decreased battery charging speed: One of the signs that appear when your phone’s charging port is damaged is the decreased mobile charging speed. Although this problem can have various causes, such as battery failure, and using fake and non-original chargers, but the issue could very well be arising from the charging port of your device too.

Summing Up

How to replace charging port on LG Stylo 4? In this guide from Technology Gadgets Magazine, we focused on learning how to replace the charging port on LG Stylo 4. Hope you found the guide helpful.